Nano Coating for Wheel Rims

>How to Apply Nano Coating for Wheel Rims

• Surface Preparation</strong><br />Ensure the wheel rims are thoroughly cleaned, dry, and free from grease, fingerprints, and detergent residues. Use a mild cleaning solution if needed and dry completely before application.
• Application Process
  Shake the product well before use. Apply a small amount of coating onto a thin, lint-free cloth. Spread evenly in circular motions to create a uniform layer. Avoid excessive pressure to ensure even coverage.
• Drying & Curing
  Allow the coating to dry for at least 30 minutes. During this time, keep the rims dry and avoid exposure to water, rain, or road debris.
• Final Result & Maintenance
  If any streaks appear after drying (usually from over-application), gently polish the surface with a clean, dry, non-absorbent cloth. No additional application is needed during the protection period.

Technical Specifications

• Dilution: None
• Coverage: 10 ml/sq.m
• Environmental Conditions: 5 – 30°C, humidity <70%
• Application Temperature:</strong> 5 – 30°C
• Curing/Drying Time: 30 – 60 minutes</li>
• Durability: Up to 12 months or 20,000 km
• Color: Transparent / Invisible
• Storage Temperature: 5 – 30°C
• Shelf Life: 24 months

Important Safety Information

• Avoid inhaling sprayed products.
• Do not mix with other chemicals.
• Proper dosage reduces costs and environmental impact.
• Not tested on animals.
• Keep out of reach of children.