Nano Coating for Solar Panels

How to Apply Nano Coating for Solar Panels

Suitable for:

✔ Solar panels of all types and sizes.

Application Instructions

• Surface Preparation: Ensure the surface is clean, dry, and free from oil residues. There should be no fingerprints or leftover detergent residues. Use a mild cleaning solution if necessary, then wipe thoroughly before application.
• Application Process: Shake well before use. Spray evenly onto the surface while following the recommended coverage rate. Use a thin, lint-free cloth to spread the product evenly with light, circular motions, ensuring a thin, uniform layer. Avoid excessive pressure.
• Drying & Curing: Allow the coating to dry for at least 30 minutes before touching the surface.
  Avoid exposure to rain or water during the initial curing phase.
  The final result develops over 5 to 8 weeks for full effect.
• Final Result & Maintenance: If, after full drying, slight stains appear (caused by over-application), gently polish the surface with a dry cloth.
  It is recommended to use a thin, non-absorbent cloth that does not retain excess product or leave fibers on the surface.
  No additional coatings are needed during the protection period.

Technical Specifications

• Dilution: None
• Coverage: 10 ml/sq.m
• Environmental conditions: 5 – 30°C, humidity <70%
• Application temperature: 5 – 30°C
• Curing/Drying time: 30 – 60 minutes
• Durability: Up to 36 months
• Color: Transparent / Invisible
• Storage temperature: 5 – 30°C
• Shelf life: 24 months

Important Safety Information

• Avoid inhaling sprayed products.
• Do not mix different products.
• Proper dosage reduces costs and environmental impact.
• Not tested on animals.
• Keep out of reach of children.